|
| |
|
|
Multifunctional SNOM probes of new generation for correlative SEM/SPM measurements
Zezulka, Lukáš ; Kolíbal, Miroslav (referee) ; Spousta, Jiří (advisor)
Práce se věnuje návrhu multifunkční SNOM sondy pro korelativní SEM/SPM měření využívající dutého optického vlákna s plným jádrem. V rešerši jsou prozkoumány možné způsoby výroby SNOM hrotů na dutém optickém vlákně, využití dutých kapilár pro přívod pracovních tekutin ke vzorku a možnosti přívodu potenciálového rozdílu ke vzorku pomocí kapilár vyplněných vodivým materiálem. Dále je v práci prezentován vyvinutý způsob výroby unikátních SNOM hrotů a celý koncept je ověřen provedenými korelativními měřeními. Následně jsou diskutované problémy spojené s výrobou a měřeními.
|
|
|
Evaluation of gas flow in the scintillation detector at different profiles and sizes of holes in the screens that have shaped the network
Truhlář, Michal ; Špinka, Jiří (referee) ; Maxa, Jiří (advisor)
This work deals with the flow of gas in the scintillation detector. Thesis describes the function of an electron microscope, the composition, distribution and development of microscopes from the earliest to modern. The work also includes familiarization with SolidWorks 3D modeling in which is the electron microscope modeled and Cosmos FloWorks in which they are carried out simulations of gas flow. The paper is focused on the flow of gas in various shapes of the screen and various pressures in chamber of specimen. The results of the analysis of both apertures variants are compared with the request to minimize the pressures in the trajectory of the secondary electrons of well as in the chamber of specimen.
|
|
|
Scintillation SE Detector with Controlled Gas Flow for VP SEM
Kozák, Josef ; Neděla, Vilém (referee) ; Jirák, Josef (advisor)
This master’s thesis deals with a design and optimization of an experimental scintillation secondary electron detector for the environmental scanning electron microscope and with a description of a detector operation principle. The experiment is founded on simulations of a gas flow in detector inner sections and on simulations of secondary electron trajectories in electrostatic fields of the detector. On the basis of the simulations, new solutions of the detector designs are proposed. For these designs, same simulations as previous are performed and designs that seem to be feasible for the secondary electron detection in environmental scanning electron microscope are selected.
|
|
|
Design of combustion chamber control
Bábíček, Ondřej ; Repka, Martin (referee) ; Habán, Vladimír (advisor)
The subject of the diploma thesis is research of the testing process exhaust clamps. There is a description of a testing device designed to provide simulations of the real operating conditions on an exhaust assembly. The testing device is named the Hot Gas Test Bench. The thesis solves the optimization process of the test setup by determining the optimal fuel ratio, which is given by air flow as oxidizer and flow of natural gas as fuel. The input parameters which provide flow of mentioned fluids are speeds of blowers. In diploma thesis is created a design of initialization and control process to ensure the optional combustion ratio during the entire length of the test.
|
|
|
Study of the Gas Blow-by through the Turbocharger Sealing System
Požár, Vladimír ; Novotný, Pavel (referee) ; Vacula, Jiří (advisor)
The work focuses on the investigation of gas flow within the sealing system of a turbocharger, specifically in the compressor section. The sealing „piston” ring located here is the main subject of the study, primarily examining the influence of the ring's geometry and its positioning in the shaft groove on gas leakage into the bearing housing. Furthermore, the behavior of this flow under various boundary conditions is assessed by testing different flow types.
|
|
|
Multifunctional SNOM probes of new generation for correlative SEM/SPM measurements
Zezulka, Lukáš ; Kolíbal, Miroslav (referee) ; Spousta, Jiří (advisor)
Práce se věnuje návrhu multifunkční SNOM sondy pro korelativní SEM/SPM měření využívající dutého optického vlákna s plným jádrem. V rešerši jsou prozkoumány možné způsoby výroby SNOM hrotů na dutém optickém vlákně, využití dutých kapilár pro přívod pracovních tekutin ke vzorku a možnosti přívodu potenciálového rozdílu ke vzorku pomocí kapilár vyplněných vodivým materiálem. Dále je v práci prezentován vyvinutý způsob výroby unikátních SNOM hrotů a celý koncept je ověřen provedenými korelativními měřeními. Následně jsou diskutované problémy spojené s výrobou a měřeními.
|
|
|
Design of combustion chamber control
Bábíček, Ondřej ; Repka, Martin (referee) ; Habán, Vladimír (advisor)
The subject of the diploma thesis is research of the testing process exhaust clamps. There is a description of a testing device designed to provide simulations of the real operating conditions on an exhaust assembly. The testing device is named the Hot Gas Test Bench. The thesis solves the optimization process of the test setup by determining the optimal fuel ratio, which is given by air flow as oxidizer and flow of natural gas as fuel. The input parameters which provide flow of mentioned fluids are speeds of blowers. In diploma thesis is created a design of initialization and control process to ensure the optional combustion ratio during the entire length of the test.
|
|
|
SMV-2019-26: Thermacut Course
Mrňa, Libor
Schlieren visualization of flow through laser cutting nozzles with cross section similar to Laval nozzle. Training for Termacut k.s workers on principles of laser cutting.
|
|
|
Evaluation of gas flow in the scintillation detector at different profiles and sizes of holes in the screens that have shaped the network
Truhlář, Michal ; Špinka, Jiří (referee) ; Maxa, Jiří (advisor)
This work deals with the flow of gas in the scintillation detector. Thesis describes the function of an electron microscope, the composition, distribution and development of microscopes from the earliest to modern. The work also includes familiarization with SolidWorks 3D modeling in which is the electron microscope modeled and Cosmos FloWorks in which they are carried out simulations of gas flow. The paper is focused on the flow of gas in various shapes of the screen and various pressures in chamber of specimen. The results of the analysis of both apertures variants are compared with the request to minimize the pressures in the trajectory of the secondary electrons of well as in the chamber of specimen.
|
guest ::
